Server Upgrade

We are performing a site upgrade today, 1/10/14 @ 4PM PST. Our website will not be accessible for approximately 1 hour. Thank you for your patience.

Nora Lighting 6" IC Sloped Ceiling Remodel Recessed Light Housing - NHRIC-926QAT See details.

$29.88
(Free Shipping On Orders Over $99)
In Stock as of 08/19/14
Leaves Warehouse In: 2 - 4 business days
  • Model# NHRIC-926QAT
  • Brand: Nora Lighting
  • Height: 7.5"
  • Width / Diameter: Elliptical Opening: 6.5" x 7", Overall: 13"
  • Depth: 7.125"
  • Lamping: 75W incandescent (Bulb NOT included)

Important Note

Minimum Clearances -"IC" Housings is direct contact with insulation: no minimum clearance is required.
Maximum Slope Angle -Pitch: 6/12: Angle: 22.5°
Ceiling Thickness -Ceiling thickness varies from 0.625" - 1.375" (remodel can accept 0.375" minimum ceiling thickness).
Lamp Adjustment -Three adjustment points allow slight tilt of housing cylinder with slide and tilt adjustments for the socket.
Installation -New Construction: Bar hangers are adjustable from 13.625" to 24" and can be repositioned 90°.
Remodel: High tension tempered steel springs secure remodel housings evenly to ceiling: hole cutout template provided for convenience.
Junction Box -Contains seven 0.5" knockouts and four Romex pryouts with strain relief.
Electrical -Quick Connector provided.
Listing - UL Damp Location w/ Feed Through WSEC ASTM E283 for Air Tight (AT only).
Designed for IC (insulated ceiling) application, this Nora Lighting recessed light housing unit is ideal for sloped ceiling use. For remodel situations, this budget-friendly design works in ceilings sloped up to 22.5 degrees, or a 6/12 pitch. Air tight construction adds energy savings, while your choice of finishing trims creates a custom look.

Questions and Answers

  • The compatibility of the Nora Lighting 6" IC Sloped Ceiling Remodel Recessed Light Housing - NHRIC-926QAT on a pitched ceiling depends on the kind of trim you plan to accompany it. Some will work and some won't.
    Andrea - Arcadian LightingApr 04, 2008
  • Nora Lighting 6" IC Sloped Ceiling Remodel Recessed Light Housing - NHRIC-926QAT Is a product I would be interested in. As a novice, I have a simple question. Is this product adjustable to a 6 degree ceiling? In other words is it 22 degrees down to zero degrees?
    JohnJul 15, 2008
    Yes, this sloped recessed housing can be adusted down from 22 deg. to almost 0 deg. Thus, the 6 deg. slope from the horizontal plane is fine. For your info. the maximum pitch of 6/12 means for every 6 feet up, it's 12 feet across.
    Tony - Arcadian LightingJul 15, 2008
  • I need to install 10 Nora Lighting 6" IC Sloped Ceiling Remodel Recessed Light Housing - NHRIC-926QAT for my new kitchen. I have a vaulted ceiling and was looking at installing these with some of the different covers, The listing for this shows that it can be use with trim NTM52. But it appears that NTM52 is an eyeball trim that the bulb sits in, bulb for is fixed. So does NTM52 trim fit with this housing? Does NTM52 have a lense on the pivot part that appears to be the bulb?
    TiaJan 19, 2010
    I have confirmed with Nora Lighting that 6" IC Open Gimbal Adjustable Trim - NTM-52 is compatible with the NHRIC-926QAT sloped ceiling housings. I have also verified that all the trims that we have listed under "Arcadian Lighting Recommends" on the product page for the NHRIC-926QAT are compatible with that housing as well. The way that the NTM52 gimbal trim works with a sloped ceiling adapter is that there is a floating socket (included with the trim) that fastens to the the stationary housings and allows mobility. The glass pictured is not a lense. It is the lightbulb for that fixture.
    Elizabeth - Arcadian LightingJan 20, 2010

Customer Reviews

  • There are no reviews for this item, yet.
  • Write a review

transparent light