Nora Lighting 4" LED IC/Airtight New Construction Housing - NHIC-4LEDAT See details.

(Free Shipping On Orders Over $99)
This item is no longer available.
  • Model# NHIC-4LEDAT
  • Brand: Nora Lighting
  • Height: 6.375"
  • Width / Diameter: 12.625"
  • Depth: 8.125"
  • Lamping: 65W (Bulb NOT included)

Important Note

  • Plaster Frame: One piece 0.040 galvanized steel die cut frame.
  • Housing:
    0.040 steel housing adjusts from 5/8" (Min) to maximum ceiling thickness of 1-5/8". Integral spring brackets remain flush with housing.
  • Clearance: "IC" Insulated Ceiling housings are direct contact rated: no minimum clearance is required
  • Bar Hangers:
    Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90° perpendicular to junction box if desired. Bar hanger foot contoured to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.

  • LED Driver:
    120V AC, 60Hz, Power Factor > 0.9 at 120V. Dimmable with most incandescent 2-wire dimmers. Mounted to the junction box for cool operation and easy access. Class 2 driver.
  • Junction Box:
    Prewired 25 cubic inch .064" thick galvanized steel, with seven 1/2" NPT knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
  • Thermal Protector: Standard UL thermal protector rated for 90°C is affixed to inner top surface of housing.
This Nora Lighting LED new construction housing unit features a 4” size and air tight construction. Designed for IC applications, this LED lighting unit features an included LED driver, for easier installation. Can be dimmed down to 3%, adding to the overall energy savings. It exceeds Title 24 high efficacy requirements, saving you more than 75% in comparison to the 65W BR30.


  • IC rated for direct contact with insulation
  • Quick connector for electrical connection to the LED Trim
  • ASTM E283 for Air Tight
  • Title 24 Compliant
  • UL listed for through branch circuit wiring
  • UL listed for Wet Location
  • Economical 2-wire dimming down to 3%
  • 50,000 hours at 70% lumen maintenance rated life
  • Modular Design: Install Housing w/ Driver, then finish with the LED Trim
  • Three year limited warranty
View compatible Recessed Lighting Trims

Questions and Answers

  • Greetings, I ordered this LED housing not realizing that I will also need an LED engine and 4" trim. Do you have these products to fit the Nora housing I bought? I would like the LED output to be approximately 600 lumens
    DavidAug 18, 2010
    Hello David, The manufacturer advised that you would need to order Nora Lighting 4" Reflector Trim, 11W LED, Self Flanged 3-1/2 Aperture - NTR-4LED( Lumen output aprox 560). You have the choice between 3000K (more of a warm light) and 4200K (cooler white light)
    Cynthia - Arcadian LightingAug 19, 2010
  • do you have a small hi hat for led bulbs?Not the retro fit
    RdonJan 01, 2013
    You can use any of Nora's 4” incandescent housings with a screw in LED lamp. Here are your 4" trim options. Please advise back if any interest you and I can help you locate it on our site.
    Sandy - Arcadian LightingJan 03, 2013

Customer Reviews

  • There are no reviews for this item, yet.
  • Write a review

transparent light