Designers Fountain 5" and 6" Retrofit LED Recessed Downlight - DF-RTL67301 See details.

1 Review(s)
(Free Shipping On Orders Over $99)
This item is no longer available.
  • Model# DF-RTL67301
  • Brand: Designers Fountain
  • Width / Diameter: 7.375" dia.
  • Depth: 4.48"
  • Finish: Brushed Nickel or White
  • Lamping: 14.5W LED (Bulb NOT included)

Important Note

  • LED: Lighting class high power LED from a nationally recognized manufacturer
  • Lens: PC constructed with high-tech micro-lens for an efficient light transmission ratio and diffusion - impact resistant.
  • Body: Die cast aluminum alloy
  • Mounting Spring: Torsion spring steel

Energy Efficiency:
  • Meets or exceeds energy efficiency requirements for ENERGY STAR® and Title 24
  • Air Tight Compliant

Installation: - Installs into any 5" or 6" Edison based socket in 3 quick and easy steps
  • Step One: remove old trim and bulb
  • Step Two: twist adaptor into socket and plug new fixture into socket adaptor
  • Step Three: insert new LED trim

ETL Classified for use with:
  • Commercial Electric: C7, C7R, C7S, C7SR, C7IC, C7ICA, C7ICRA, HBR5000SIC, HBR5, HBR5R, HBR5ICAT, HBR5ICRAT
  • Halo LED Housings: H750ICAT, H750RICAT
This Designers Fountain 5” and 6” retrofit recessed downlight comes with its own LED light source, making it an energy efficient choice for your home. The clean styling and beveled appearance creates a classic yet modern look, while the White finish allows it to blend in seamlessly.


  • Connects by the quick plug-in connector to any E26 medium screw-base Edison socket
  • Over 80% high efficiency electronic power supply providing constant current to LED
  • Dimmable to 15% minimum via standard 120v TRIAC dimmer
  • 45 Lumens per Watt
  • Adapts to 5" or 6" can
  • IC or non IC
  • 50,000 hour long life
  • 3 Year Warranty

Questions and Answers

  • There are no questions for this item, yet.

Customer Reviews

  • Average Customer Review

    3 out of 5
  • Write a review
    • Lafayette, CA
    • LED light retrofit

      The new LED lighting has added improved lighting over the old flood lights. I am very pleased with the results, areas that were not adequately lighted are now well lit. The look of the new light is also an improvement. The retrofit is fairly easy but there is one major issue with fitting the light into the existing can. The springs that hold the light into the can are difficult to adjust so that they stay in properly. The spring tension is way to stiff and the tabs that hold the springs have to be bent to fit the existing can as the fit both 5" and 6" cans. Some went in easy and others were very difficult to adjust. One spring broke and I had to make do with a spring from the old light I removed. I am afraid that if I have to pull them down to paint I will have a difficult time getting them back in place.The whole process was very frustrating. Also ther is no means to hold the old light socket that the LEd retrofit screws into so in addition to fighting with the spring adjustment you have to juggle the connection so it does not hang up the fixture sliding into place. A major design flaw that could have easily been avoided. Each can took from 10 to 30 minutes to install depending on adjusting the springs.

Suggested Items

transparent light