Answer: As per Meyda Tiffany (the manufacturer), the dimension of the table lamp is 18.5″ total height and the shade has 6.5″ H x 12″ W. This model is currently in stock and has a one week lead time, shipping directly from the Meyda in New York.
Answer: This chandelier from ET2 Lighting (the manufacturer) is a low voltage fixture that is supplied with everything you need for installation including a transformer. This item is confirmed in stock and ships in 24-48 hours.
Answer: We have been advised by Craftmade (the manufacturer), that this ceiling fan light kit has a pull chain not a switch. As well, the fixture comes in two finishes , vintage madera and aged bronze.
Answer: We have been advised by Adesso (the manufacturer), that you may insert compact fluorescent bulbs in to this torchiere lamp. However, the wattage would be a lot less compared to an incandescent bulb. As well, the brightness would not change, unless you changed the number of kalvins in the bulb.
Answer: The FM-FP4120-SN is 16″ in height including the 6″ downrod. Unfortunately, Fanimation (the manufacturer) advised that the shortest downrod is 6″ and it must be used with the ceiling fan, as the fan itself can not be mounted directly to the ceiling.
Answer: This kitchen island lighting from Murray Feiss (the manufacturer), has an over all height of 44.75″, and is therefore only 22″ in height, minus the canopy and minus the chain. We have confirmed this item to be in stock
What can you tell me about the geometry of the glass for LBL Lighting Athena Wall Sconce – HW5498? Is it round all the way around, like a drinking glass, or is it essentially like half a drinking glass, sliced down the middle? Is the glass then flush with the wall?
Answer: We have confirmed with LBL Lighting (the manufacturer), that the shade is half a cylinder it is not completely a full cylinder. Also the glass for this wall sconce fit flush against the wall.
Answer: For the FUSIONKIT8ST from LBL Lighting (the manufacturer), the surface transformer can go anywhere along the rail. Just keep in mind that the cord that connects the transformer to this monorail lighting is 36″ long and the surface transformer needs to be mounted under the junction box.
Answer: Lite Source (the manufacturer), confirmed that this pendant light can be hung from a sloped ceiling, however a slopped ceiling adapter would need to purchased separately. The slopped ceiling adapter would be fine on a 30 degree slopped ceiling.