The field-cuttable rigid standoff with connector is used to join sections of track together end to end while supporting the system. Order one for each connection point between track sections. Use conductive type to continue power through connection. Use isolating type to isolate multiple circuits on one continuous run. Select the appropriate length to match the specified drop for the system.
Features
Due to the inherent traits of artisan-crafted products and applied finishes, slight variation in color, pattern, or thickness may occur. For lighting products, most pictures are taken when product is lit.
TIP: Use standoff supports every
four feet of a T-Track run. For best appearance, place the last standoff 4-6" from the end of the run, and place standoffs symetrically, alternating between standoffs WITH connector and standoff WITHOUT connector in the center of each 8' track section.
T-Trak Adjustable Standoff with Connector
T-Trak Adjustable Standoff without Connector
T-Trak Rigid Standoff with X / T / L Connector
T-Trak Rigid Standoff without Connector
T-Trak Standoff Vault Adapter
T-Trak T-Bar Clip
T-Trak Support Outside Rigger with Connector
T-Trak Support Outside Rigger without Connector
